Charging the battery pack
You cannot charge the battery pack while your camera is turned on. Be sure to turn off your camera before charging.
BATT CHARGE lamp
Battery pack (M series)
To the wall outlet (mains)
| Power cord |
DC IN jack cover | (mains lead) |
AC power adaptor
1Insert the battery pack into your camera.
2Open the DC IN jack cover and connect the DC connecting cable to the DC IN jack of your camera with the v mark facing up.
3Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains).
The BATT CHARGE lamp lights orange when charging begins. When the BATT CHARGE lamp goes off, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack inserted for about one hour after normal charge is completed.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still record or play back images.
This indication may not be entirely accurate depending on the conditions of use and the operating environment.
Auto
If you do not operate the camera for about three minutes during recording, the camera turns off automatically to prevent wearing down the battery. To use the camera again, slide down the POWER switch to turn on the camera again.
started Getting
9