Additional Information
Rear speaker connecting cord, 10 m
(2)
Audio connecting cord, 1.5 m (1)
Remote Commander
Sony batteries
Design and specifications are subject to change without notice.
Glossary
Center mode
Speaker setting to enhance the Dolby Pro Logic Surround mode. Select one of the following four center modes according to your speaker system.
•NORMAL mode
Select NORMAL mode if you connect a small sized active center speaker to this speaker system. Since a small speaker cannot produce enough bass, the bass sound of the center channel is output from the front speakers.
Front |
| Small | Front | ||||
speaker (L) | center speaker | speaker (R) | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear | Rear |
speaker (L) | speaker (R) |
The test tone is output as shown on page 11.
• WIDE mode |
Select WIDE mode if you connect an active |
center speaker equivalent to the two front |
without using rear speakers. |
| |||||
| Center |
| ||||
Front | speaker | Front | ||||
speaker (L) |
|
|
|
|
| speaker (R) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The test tone is output:
/Front (L) /Center /Front (R)
•PHANTOM mode
Select PHANTOM mode if you do not want to use the center speaker to output sound. The sound of the center channel is output from the front speakers.
Front |
| Front |
speaker (L) |
| speaker (R) |
|
|
|
|
|
|
Rear | Rear |
speaker (L) | speaker (R) |
The test tone is output:
/Front (L) + (R) /Rear
Delay time
Time lag between the surround sound output from front speakers and rear speakers. By adjusting the delay time of the rear speakers, you can obtain the feeling of presence. Make the delay time longer when you have placed the rear speakers in a small room or close to your listening position, and make it shorter when you have placed them in a large room or apart from your listening position.
Index
A, B
Adjusting bass 12 delay time 12 speaker volume 11
super woofer level 11, 12 treble 12
volume 11
Audio component hookups 9
C
Center mode 13, 15 NORMAL mode 13, 15 PHANTOM mode 13, 15 3 CH LOGIC mode 13, 15 WIDE mode 13, 15
Connecting. See Hookups
D
Delay time 12, 13, 15
Dolby Pro Logic Surround 10, 15
center mode 13, 15 Dolby Surround sound 15
E, F, G
External center speaker 13
H, I, J, K, L, M
Hookups
AC power cord 9 audio components 9 speakers 8 TV/VCRs 9
N, O
NORMAL mode 13, 15
P, Q
PHANTOM mode 13, 15
speakers. With the WIDE mode, you can |
take full advantage of Dolby Surround |
sound. | Center |
| ||||
| Front | |||||
Front | speaker | |||||
speaker (L) |
|
|
|
|
| speaker (R) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear | Rear |
speaker (L) | speaker (R) |
The test tone is output as shown on page 11.
• 3 CH LOGIC mode
Select 3 CH LOGIC mode if you don't want to use the rear speakers to output sound. The sound of the rear channel is output from the front speakers to let you experience some of the surround sound
Dolby Pro Logic Surround
Decoding system of Dolby Surround sound standardized in TV programs and movies. Compared with the former Dolby Surround system, Dolby Pro Logic Surround improves sound image by using four separate channels:
Dolby Surround
Encoding and decoding system of Dolby Surround sound for consumer use. Dolby Surround decodes the extra channels on the Dolby
R
Remote 6, 10, 11, 12
S
Speakers connection 8 placement 7
Speaker volume 11 Surround sound 10, 11, 12
T
Test tone 11
3 CH LOGIC mode 13, 15 Troubleshooting 14 TV/VCR hookups 9
U, V
Unpacking 6
W, X, Y, Z
WIDE mode 13, 15
15