Sony SA-VA10 Installing the Anti-vibrationpads, Choosing the Best Location, Using the remote

Getting Started

Using the remote

You can use the shaded buttons shown below to operate Sony TVs.

+

–

To	Press
turn on a Sony TV	TV POWER
operate a Sony TV	the button(s) for the operation
	you desire.
turn off a Sony TV	TV POWER

Installing the Anti-vibration pads

1Spread a towel, or other soft cloth, over a table and lay the speakers down.

2Peel off the covering sheet from the anti-vibration pad and attach it on the bottom of the speakers (4 for each speaker).

3Make sure the anti-vibration pads are securely attached and stand the speaker upright.

Choosing the Best Location

To obtain high sound quality and a proper sound image from the front speakers, place the speaker with the built–in operation panel to the left of your TV and the other to the right of your TV so that the center channel tweeters angle towards the center of the room.

For the best central sound image, place the left and right speakers within 5 feet of each other and equidistant from the TV.

The left and right speakers must be placed standing upright, laying them on their sides will defeat the center channel surround effect.

5 feet (max)

Place the rear speakers so that they fire directly across at each other about 2 to 3 feet above your listening position.

2-3 feet

7