Getting Started
Connecting to an amplifier with a single set of speaker terminals
If your amplifier is equipped with a single set of speaker terminals, connect the woofer to the amplifier, and then connect the front speakers to the woofer.
What cords will I need?Speaker cord (supplied) (1 for each speaker)
Twist the stripped ends of the cord about 2/3 inch (15 mm). Be sure to match the speaker cord to the appropriate terminal on the componentes: + to + and – to
Connect the SPEAKER IN terminals of the woofer to the amplifier’s speaker terminals with the speaker cords. Be sure to connect both L and R channels.
l: signal flowAmplifierSPEAKER
SPEAKER
INOUT
LL
RR
This woofer2Connect the front speakers to the woofer. Connect the speakers to the speaker terminals of the woofer.
This woofer
SPEAKER
INOUT
| L | L |
|
Front |
|
| Front |
Speaker (R) | R | R | Speaker (L) |
|
|
If your amplifier has double (A+B) sets of speaker terminals, connect both the woofer and the front speakers to the amplifier.
What cords will I need?
Speaker cord (supplied) (1 for each speaker)
Twist the stripped ends of the cord about 2/3 inch (15 mm).
Hookups
1Connect the front speakers to the amplifier. Connect the speakers to your amplifier’s speaker
terminals (A).
| Amplifier |
| SPEAKER A |
Front | Front |
Speaker (R) | Speaker (L) |
Connect the SPEAKER IN terminals of the woofer to the amplifier’s speaker terminals (B) using speaker cords (supplied).
Amplifier
SPEAKER B
SPEAKER
INOUT
LL
RR
This woofer
When using the double (A+B) sets of speakers, make sure that you select the “A+B” position with your amplifier.
NoteWhen you are using speaker terminal (A) only (front speaker only) or when the power of the amplifier is turned off, turn down the volume or turn off the power of the woofer otherwise, hum noise may be heard.
6GB