Connecting Your Satellite Receiver

Step 3: Connecting Your TV Set

Satellite Receiver

1c1a

TV

VHF / UHF

1b

IN

VIDEO 1 VIDEO 2

S VIDEO

VIDEO

L

(MONO)

AUDIO

R

1a If your TV has A/V input jacks

Connect the VIDEO OUT jacks on your Satellite Receiver to the

A/V input jacks on your TV using the supplied A/V cable. (Be sure to match the colors on the jacks with the colored plugs on the A/V cable.) If your TV has only one audio input, connect it to the L(MONO) jack on the Satellite Receiver.

1b If your TV has an S-Video input

Use an S-Video cable instead of the yellow video connection. S-Video cable is supplied.

1c If your TV does not have A/V jacks

Connect the VHF/UHF OUT jack to the VHF/UHF input jack on your TV using coaxial cable. Set the CH3/CH4 switch to the channel that does not carry off-air broadcasts in your area.

Note

With this connection, your input source is channel 3 or channel 4 depending on how you set the CH3/CH4 switch on the Satellite Receiver.

11