• Press the "Set" key on the mecablitz and use the
keys to select a remote address Sl1....Sl4
• Press the "Set" key on the mecablitz
• Touch the camera's release button in order for
the remote address you have set to be adopted
by the camera.
• The display of the mecablitz shows "SL" under
the TTL display
• Disconnect flashgun and camera
• Open out the camera flash
• Trigger a test flash on the camera, the slave
flashgun should respond with a delayed flash
• The setup is now ready to use
Important:When the slave flashgun is s witched
off it loses the remote function and has
to be switched back into remote mode
by connecting it with the camera.
It is possible to deactivate the remote function:
a) by switching off the remote function on the
flashgun
b) by deselecting "WIRELESS" on the camera
Testing the “Ratio”mode:
Switch on the camera and the controller or fold out
the camera’s built-in flash.Await the flash readi-
ness signal of the controller or the camera’s flash
unit. Fire a remote test flash with the SPOT or AEL
button on the camera.
On some cameras the flash button must be
simultaneously kept depressed (refer to the
☞
41
ķ
700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 41