Sony SCA 3302 M7 4.19 ADI flash control (Advanced Distance Integration)

44 MZ-2, 45 CL-4 (with SCA 3000 C adapter),

50 MZ-5,54 MZ-..., 70 MZ-.. and 76 MZ-5 digi

For multi-zone flash expsoure metering the TTL

mode must be selected on the mecablitz.There are

no restrictions with regard to reflector attach-

ments. Please refer to the hints given in the came-

ra’s operating instructions.

mecablitz 32 Z-2,32 MZ-3, 40 MZ-..., 45 CL-4,

50 MZ-3:

This flash mode is not specifically indicated on the

mecablitz or the SCA adapter.

4.18.3 Dynax 5D,7D, αα100

(54 MZ-..,45 CL-4 digi, 76 MZ-5 digi only)

When a Dynax 7D is operated in ADI mode,the flash

unit must always be switched to TTL-HSS mode if

this setting is available on the given flash unit. The

system does not allow TTL flash mode when using a

flash unit without the TTL-HSS function.

With the mecablitz 76MZ-5 digital,ADI flash control

is only possible in TTL flash mode for cameras

Dynax 7D,Dynax 5D and

Sony α100

With the mecablitz 45 CL-4 digital,ADI flash control

is possible in flash modes TTL and TTL-HSS for

cameras Dynax 7D,Dynax 5D and

Sony α100

4.19 ADI flash control (AdvancedDistance Integration)

ADI flash control is a multi-zone flash metering

system (pre-flash) expanded by guide number con-

trol.To enable guide number control, the camera

700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 47