•Some DVDs with the Parental Control feature do not allow use of playback modes (
pages 20 to 22).
Setting sound options
Audio Digital Out
You can switch the method of outputting the audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector.
Caution
When the console is connected to an audio device without a Dolby Digital or DTS decoder, set "Dolby Digital" and "DTS" to "Off". If you set these options to "On" without the necessary decoder, you may have no sound or an extremely loud noise may be emitted.
Digital Out (Optical)
This option sets the type of output for the DIGITAL OUT (OPTICAL) connector.
On | Select this option when you want sound (audio signal) to be output |
| through the DIGITAL OUT (OPTICAL) connector. |
| Settings for "Dolby Digital" and "DTS" are displayed. |
|
|
Off | Select this option when you do not want sound to be output through the |
| DIGITAL OUT (OPTICAL) connector. |
| Settings for "Dolby Digital" and "DTS" are not displayed. |
|
|
Dolby Digital
This option sets Dolby Digital as the output signal for the DIGITAL OUT (OPTICAL) connector.
On | Select this option when the console is connected to an audio device |
| with a |
|
|
Off | Select this option when the console is connected to an audio device |
| without a |
|
|
DTS
This option sets DTS as the output signal for the DIGITAL OUT (OPTICAL) connector.
On | Select this option when the console is connected to an audio device |
| with a |
|
|
Off | Select this option when the console is connected to an audio device |
| without a |
|
|
Audio Track Auto Select Mode
This setting gives priority to the audio track that contains the highest number of channels when you play a DVD on which multiple audio formats (PCM, Dolby Digital or DTS) are recorded. If PCM, Dolby Digital and DTS have the same number of channels, the console selects PCM, Dolby Digital and DTS audio tracks in that order.
On | Priority given |
|
|
Off | No priority given |
|
|
US
DVDs
Adjusting DVD player settings 27