Sony SDC-415 SERIES Connecting to a monitor, Connecting to power, AC Power Type AC 24V, 300mA

Installation

■Connecting to a monitor

Please connect the video output terminal located on the back of the camera to the monitor.

CCD Camera Monitor

•The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument.

•Please turn off the power when connecting.

•Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and select 75Ω for the Intermediate device as shown in the picture below.

CCD Camera

Intermediate End monitor

■Connecting to power

Each model has a different power input specification.

Please check the model type and standard power requirement before connecting to power.

AC Power Type (AC 24V, 300mA)

Use AC24V, 300mA adaptor

For SDC-415NA/SDC-415PA.

DC Power Type (DC 12V, 500mA)

Use DC12V, 500mA adaptor

For SDC-415ND/SDC-415PD.

High Voltage Type (AC230V, 50/60HZ)

Use AC230V, 50/60Hz power source

For SDC-415PH.

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size(AWG)	#24(0.22mm2)	#22(0.33mm2) #20(0.52mm2)		#18(0.83mm2)
Resistance value(Ω/m)	0.078	0.050	0.030	0.018
Voltage drop(V/m)	0.028	0.018	0.011	0.006

•As shown in the table above, voltage decreases as the wire gets longer.

Therefore use of an excessively long adaptor output line for connection to the camera

may affect the performance of the camera.

Standard voltage for camera operation : DC 12V±10%

There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

COLOR CCD CAMERA 18 User’s Manual COLOR CCD CAMERA 19 User’s Manual