To view the Operating Instructions on the CD-

ROM

Note

To view the Operating Instructions on the CD-ROM, Macromedia Shockwave Player and Adobe Acrobat Reader (version 6.0 or later) must be installed on your computer. The “installs” folder on the CD-ROM contains the installation programs for them.

If you want to install those programs, open the “My Computer” and right-click on the CD-ROM drive, then select “Explore” and open the “installs” folder.(for Windows only)

If you are using a Macintosh computer:

Double-click on the CD-ROM icon to open the window, then double-click on the “MONITOR” icon.

To view the Operating

Instructions

The Operating Instructions files are included in the supplied CD-ROM. Load the supplied CD- ROM into the CD-ROM drive of your computer. After a while, the introductory page of the CD- ROM will open automatically.

If the introductory page does not appear automatically, open the Operating Instruction file directly. (for Windows only)

1Open the “My Computer.”

2Right-click the “CD-ROM” drive, and select

“Explore.”

3Open the “manuals” folder.

4Open the “HS” folder.

5Select and open the “HS_75_**.pdf.”

(“**” in the file name stands for the language in which each PDF file is written. For example, HS_75_GB.pdf is written in British English.)

To exit from the CD-ROM

Click “EXIT/CD-ROM.”

Setup

Unpacking

Make sure your carton contains everything listed below.

LCD display

Power cord

HD15-HD15 video signal cable (analog RGB)

Cord strap

CD-ROM (utility software for Windows/ Macintosh, Operating Instructions, etc.)

Warranty card

This Quick Setup Guide

US

Connecting your monitor

Connect your monitor to a computer or other equipment.

Turn off the monitor, computer, and any other equipment before connecting them.

Do not touch the pins of the video signal cable plug.

1 Open the stand.

2 Remove the back cover.

3 Connect your monitor to a computer.

Connecting a Macintosh computer

Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied).

Connect the adapter to the computer before connecting the video signal cable.

4 Connect the supplied power cord to the monitor’s AC IN connector.

3 (US)