Troubleshooting

Trouble symptoms and remedies (If no picture appears on the screen)

If no picture appears on the screen, check the following table for possible solutions. If you are experiencing difficulties not listed below, refer to the Operating Instructions on the supplied CD-ROM. For problems caused by a computer or other equipment, refer to the user’s manuals supplied with the respective items.

Symptom

Check these items

 

If the 1 (power)

• Check that the power cord is properly connected.

 

indicator is not lit, or

 

 

if the 1 (power)

 

 

indicator will not

 

 

light up when the 1

 

 

(power) switch is

 

 

pressed,

 

US

If CABLE

• Check that the video signal cable is properly connected and

DISCONNECTED

all plugs are firmly seated in their sockets (page 3 (US)).

appears on the

• Check that the video input connector’s pins are not bent or

screen,

pushed in.

 

• A non-supplied video signal cable is connected. If you

 

connect a non-supplied video signal cable, CABLE

 

DISCONNECTED may appear on the screen before entering

 

the power saving mode. This is not a malfunction.

If NO INPUT SIGNAL appears on the screen, or the 1 (power) indicator is orange,

•Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets (page 3 (US)).

•Check that the video input connector’s pins are not bent or pushed in.

xProblems caused by a computer or other equipment connected, and not caused by the monitor

•The computer is in the power saving mode. Try pressing any key on the keyboard or moving the mouse.

•Check that your graphics board is installed properly.

•Check that the computer’s power is on.

•Restart the computer.

5(US)