Sony SDM-HS75 Displaying this monitor’s information, MENU

Symptom		Check these items
	If OUT OF RANGE x Problems caused by a computer or other
	appears on the	equipment connected, and not caused by the
	screen,	monitor
		• Check that the video frequency range is within that specified
		for the monitor. If you replaced an old monitor with this
		monitor, reconnect the old monitor and adjust the computer’s
		graphics board within the following ranges:
		Horizontal: 28–80 kHz
		Vertical: 48–75 Hz
		Resolution: 1280 × 1024 or less
	If you are using	• If you replaced an old monitor with this monitor, reconnect
	Windows and	the old monitor and do the following. Select “SONY” from
	replaced an old	the “Manufacturers” list and select “SDM-HS75” from the
	monitor with this	“Models” list in the Windows device selection screen. If the
	monitor,	model name of this monitor does not appear in the “Models”
		list, try “Plug & Play.”

Displaying this monitor’s information

While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds until the information box appears.

Press the MENU button again to make the box disappear.

MENU

Although the safety standard registered model name of this unit is SDM-HS75/, the name of SDM-HS75 is used on sale and in this instruction manual.

If any problem persists, call your authorized Sony dealer and give the following information:

•Model name: SDM-HS75

•Serial number

•Detailed description of the problem

•Date of purchase

•Name and specifications of your computer and graphics board

Example

INFORMATION1

MODEL : SDM-HS75

SER . NO : 12345672

MANUFACTURED : 2004-52

3

1Model name

2Serial number

3Week and year of manufacture

6(US)