xAdjust the picture’s sharpness manually

(Phase/Pitch)

You can adjust the picture’s sharpness as follows. This adjustment is effective when the computer is connected to the monitor’s HD15 input connector (analog RGB).

1Set the resolution to 1280 1024 on the computer.

2Load the CD-ROM.

3Start the CD-ROM, select the area and model, and display the test pattern.

For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

4Press the MENU button.

The main menu appears on the screen.

5Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

6Press the m/M buttons to select “PHASE” and press the OK button.

The “PHASE” adjustment menu appears on the screen.

7Press the m/M buttons until the horizontal stripes are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

8Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures.

9Press the m/M buttons to select “PITCH” and press the OK button.

The “PITCH” adjustment menu appears on the screen.

10Press the m/M buttons until the vertical stripes disappear.

Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

xAdjust the picture’s position manually

(H CENTER /V CENTER)

If the picture is not in the center of the screen, adjust the picture’s centering as follows.

1

Set the resolution to 1280 1024 on the computer.

2

Load the CD-ROM.

 

3

Start the CD-ROM, select the area and model, and

 

display the test pattern.

 

 

For Windows

 

 

Click [Utility] t [Windows]/[Win Utility.exe].

 

For Macintosh

 

 

Click [Utility] t [Mac]/[Mac Utility].

 

4

Press the MENU button.

 

 

The main menu appears on the screen.

 

5

Press the m/M buttons to select

(SCREEN) and

 

press the OK button.

 

 

The SCREEN menu appears on the screen.

 

6

Press the m/M buttons to select “H CENTER” or “V

 

CENTER” and press the OK button.

 

 

The “H CENTER” adjustment menu or “V CENTER”

adjustment menu appears on the screen.

GB

7Press the m/M buttons to center the test pattern on the screen.

8Click [END] on the screen to turn off the test pattern.

MENU POSITION menu

You can change the menu position if it is blocking an image on the screen.

MENU POS I T I ON

1 2 8 0 x 1 0 2 4 / 6 0 H z

E X I T

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (MENU

POSITION) and press the OK button.

The “MENU POSITION” menu appears on the screen.

3Press the m/M buttons to select the desired position and press the OK button.

You can choose one of 9 positions where the menu will appear.

13