Setup
Before using your monitor, check that the following items are included in your carton:
•LCD display
•Power cord
•
•
•Cord strap
•
•Warranty card
•Quick Setup Guide
Step 1:Open the stand
Note
The stand is folded at the factory. Be sure not to place the display vertically with the stand as it is. Otherwise, the display may topple over.
Step 2:Connect the display to your computer
Turn off the monitor and computer before connecting.
Notes
•Do not touch the pins of the video signal cable connector as this might bend the pins.
•Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector.
Connect a computer equipped with a DVI output connector (digital RGB)
Using the supplied
to the
to the computer’s DVI output connector (digital RGB)
Connect a computer equipped with an HD15 output connector (analog RGB)
Using the supplied
Connect the computer according to the following illustrations.
xConnecting to an IBM PC/AT or compatible computer
to the HD15 input connector (analog RGB)
to the computer’s HD15 output connector (analog RGB)
|
| ||
IBM PC/AT or | cable (analog RGB) |
| |
(supplied) | GB | ||
compatible computer | |||
|
xConnecting to a Macintosh computer
When connecting this monitor to a Macintosh computer, use the Macintosh adapter (not supplied) if necessary. Connect the Macintosh adapter to the computer before connecting the cable.
to the HD15 input connector (analog RGB)
to the computer’s | |
signal cable (analog | |
output connector | RGB) (supplied) |
Macintosh computer
7