Sony SDM-HS73, SDM-HS93 Specifications, Self-diagnosisfunction, Displaying this monitor’s information, Mass, Mass, DDC2B, DDC2B, 5 (US), Example, SER NO :, SDM-HS53, LCD panel

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up in green or flash orange. If the function tells you the monitor may have a potential failure, consult your authorized Sony dealer.

If the picture disappears from the screen and the1(power) indicator is green

1 Turn off the 1 (power) switch and disconnect the video signal cables from the monitor.

2 Turn the monitor on by pressing the 1 (power) switch.

If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure.

If the picture disappears from the screen and the

1(power) indicator is flashing orangePress the 1 (power) switch twice to turn the monitor off and then on.If the 1 (power) indicator lights up green, the monitor is working properly.

If the 1 (power) indicator is still flashing, there is a potential monitor failure.

Displaying this monitor’s information

While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds until the information box appears.

Press the MENU button again to make the box disappear.

MENU

Example

INFORMATION	Model name
MODEL : SDM-HS53
	Serial number
SER NO : 1234567
MANUFACTURED : 2003-52
	Week and year
	of manufacture

If any problem persists, call your authorized Sony dealer and give the following information:

•Model name: SDM-HS53 or SDM-HS73 or SDM-HS93•Serial number•Detailed description of the problem•Date of purchase•Name and specifications of your computer and graphics board

Specifications

SDM-HS53

LCD panel	Panel type: a-Si TFT Active Matrix
	Picture size: 15.0 inch
Input signal format
	RGB operating frequency*
	Horizontal: 28 – 61 kHz
	Vertical: 48 – 75 Hz
Resolution	Horizontal: Max.1024 dots
	Vertical: Max.768 lines

Input signal levelsRGB video signal0.7Vp-p, 75 Ω , positiveSYNC signal

TTL level, 2.2 kΩ , positive or negative

(Separate horizontal and vertical)

Power requirements
	100 – 240 V, 50 – 60 Hz,
	Max. 0.6 A
Power consumption Max. 25 W
Operating temperature 5 – 35°C
Dimensions (width/height/depth)
	Display (upright):
	Approx. 390 ⋅	342 ⋅ 185 mm
	(15 3/8 ⋅ 13 1/2 ⋅ 7 3/8 inches)
Mass	Approx. 3.8 kg (8 lb. 6 oz.)
Plug & Play	DDC2B
			US
Included items	See “Setup.”
SDM-HS73/HS93
LCD panel	Panel type: a-Si TFT Active Matrix
	Picture size: 17.0 inch (SDM-HS73)
	Picture size: 19.0 inch (SDM-HS93)
Input signal format
	RGB operating frequency*
	Horizontal: 28 – 80 kHz
	Vertical: 48 – 75 Hz
Resolution	Horizontal: Max.1280 dots
	Vertical: Max.1024 lines
Input signal levels
	RGB video signal
	0.7 Vp-p, 75 Ω , positive
	SYNC signal
	TTL level, 2.2 kΩ ,
	positive or negative
	(Separate horizontal and vertical)
Power requirements
	100 – 240 V, 50 – 60 Hz, Max. 1.0 A
Power consumption
	Max. 45 W (SDM-HS73)
	Max. 50 W (SDM-HS93)
Operating temperature 5 – 35°C
Dimensions (width/height/depth)
	Display (upright):
	Approx. 441 ⋅	404 ⋅ 216 mm
	(17 3/8 ⋅ 16 ⋅	8 5/8 inches) (SDM-HS73)
	Approx. 480 ⋅	440 ⋅ 260 mm
	(19 ⋅ 17 3/8 ⋅	10 1/4 inches) (SDM-HS93)
Mass	Approx. 5.9 kg (13 lb. 0 oz.) (SDM-HS73)
	Approx. 6.7 kg (14 lb. 12 oz.) (SDM-HS93)
Plug & Play	DDC2B
Included items	See “Setup.”

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec. Design and specifications are subject to change without notice.

5 (US)