Sony SDM-HS73, SDM-HS93 Turning on the monitor and, computer, Note, green, CD-ROM, 3 (US), to AC IN, lights in, back cover, (supplied), AC IN connector, right of the monitor

1 Remove the back cover.
		Turning on the monitor and
2 Connect your monitor to a computer.
		computer
Connecting a Macintosh computer		Turn on your monitor first, then a computer.
Connect the supplied video signal cable to a video output connector
		1 Press upward the 1 (power) switch on the front
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
3 Connect the supplied power cord to the monitor’s		right of the monitor.
		The 1 (power) indicator lights up in green.
AC IN connector.
4 Connect the power cord to a power outlet.
1	back cover
				lights in
				green
			OKMENU
		2 Turn on the computer.

US

to the HD15 (RGB) input connector

2

HD15-HD15 video signal cable (supplied)

3

to AC IN

to power outlet
4	power cord
	(supplied)

The illustration of the back of the monitor show here is that of the SDM-HS53.The same applies for the SDM-HS73/HS93 model.

Note

For details on securing the cords, refer to the Operating Instructions on theCD-ROM.3 (US)