xAdjust the picture’s position manually(H CENTER /V CENTER)

If the picture is not in the center of the screen, adjust the picture’s centering as follows.

1Set the resolution to 1280 ⋅ 1024 on the computer.

2Load the CD-ROM.

3Start the CD-ROM, select the area and model, and display the test pattern.

For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

4Press the MENU button.

The main menu appears on the screen.

5Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

6Press the m/M buttons to select “H CENTER” or “V

CENTER” and press the OK button.

The “H CENTER” adjustment menu or “V CENTER” adjustment menu appears on the screen.

7Press the m/M buttons to center the test pattern on the screen.

8Click [END] on the screen to turn off the test pattern.

MENU POSITION menu

You can change the menu position if it is blocking an image on the screen.

MENU POS I T I ON

1 2 8 0 x 1 0 2 4 / 6 0 H z

E X I T

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (MENU

POSITION) and press the OK button.

The “MENU POSITION” menu appears on the screen.

3Press the m/M buttons to select the desired position and press the OK button.

You can choose one of 9 positions where the menu will appear.

INPUT SENSING ON/OFF menu

When you select AUTO ON in the INPUT SENSING ON/OFF menu, the monitor automatically detects an input signal to an input terminal, and changes the input automatically before the monitor goes into the power saving mode.

I NPUT SENSING

AUTO ON

AUTO OFF

1 2 8 0 x 1 0 2 4 / 6 0 H z

E X I T

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (INPUT

SENSING ON/OFF) and press the OK button.

The INPUT SENSING menu appears on the screen.

3Press the m/M buttons to select the desired mode and press the OK button.

•ON: When the selected input terminal has no input signal, or when you select an input terminal by the

INPUT button on the monitor and the terminal has

no input signal, the on-screen message appears GB (page 21) and the monitor checks the input signal to another input terminal automatically to change the

input.

When the input is changed, the selected input terminal is displayed on the left upper of the screen. When there is no input signal, the monitor goes into the power saving mode automatically.

•OFF: The input is not changed automatically. Press the INPUT button to change the input.

(continued)

17