Setup

Before using your monitor, check that the following items are included in your carton:

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB)

•Audio cord (stereo miniplug)

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc)

•Warranty card

•Quick Setup Guide

Connect a computer equipped with a DVI output connector (digital RGB)

Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor’s DVI-D input connector (digital RGB) for INPUT3.

to the DVI-D input connector (digital RGB)

Setup 1:Connect the video signal cables

•Turn off the monitor and computer before connecting them.

•When connecting the computer to the monitor’s HD15 input connector (analog RGB), refer to “Connect a computer equipped with an HD15 output connector (analog RGB).”

Note

Do not touch the pins of the video signal cable connector as this might

to the computer’s DVI output connector (digital RGB)

DVI-D video signal cable (digital RGB) (supplied)

Connect a computer equipped with an HD15 output connector (analog RGB)

GB

bend the pins.

Slide up the back cover.

Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor’s HD 15 input connector (analog RGB) for INPUT1 or INPUT2.

Connect the computer according to the following illustrations.

xConnecting to an IBM PC/AT or compatible computer

to the HD 15 input connector (analog RGB)

to the computer’s HD15 output connector (analog RGB)

 

HD15-HD15 video signal

IBM PC/AT or compatible

cable (analog RGB)

(supplied)

computer

 

(continued)

7