xConnecting to a Macintosh

to the HD 15 input connector (analog RGB)

to the computer’s output connector

HD15-HD15 video signal cable (analog RGB) (supplied)

Macintosh

When connecting a Macintosh computer, use an adapter (not supplied), if necessary. Connect the adapter to the computer before connecting the video signal cable.

Setup 2:Connect the audio cord

Connect the supplied audio cord to the monitor’s corresponding audio input jack.

Using the monitor’s speakers or headphones, you can listen to sound from your computer or other audio equipment connected to the monitor’s audio input jacks.

For more information, see “Controlling the volume” on page 19.

to the audio input

to audio output of the computer or other audio equipment

audio cord (supplied)

Setup 3:Connect the power cord

1Connect the supplied power cord securely to the monitor’s AC IN connector.

2Connect the other end securely to a power outlet.

1

to

AC IN

to power outlet 2

power cord (supplied)

8