Processor Operations
EQUALIZER menu •Expand mode only•
In EXPAND mode, the settings in this menu replace the tone control settings of the SURROUND menu. This menu contains parameters that allow you to adjustment to the tone of the front (left and right), centre, and rear (left and right) speakers individually.
Rear speaker treble adjustment
Level : REAR TREBLE 0dB
Frequency : REAR TREBLE 2.5kHz
Adjust as described in “Front speaker bass adjustment”.
• The level can be adjusted ±10 dB in 0.5 dB steps.
Equalizer (on/off)
Initial setting is : EQUALIZER ON
Lets you turn the equalizer adjustments ON or OFF. You can use this setting to compare the sound of the equalizer adjustments with that of the original signal.
•OFF flattens the frequency characteristics of all channels simultaneously. If you adjust the bass or treble levels after setting the equalizer to OFF, the sound quality changes from the flat (0 dB) position.
•ON restores the frequency characteristics to the values present before the equalizer was set to OFF.
CUSTOMIZE menu
The CUSTOMIZE menu allows you to customize various aspects of the this unit’s operation. The parameters available in this menu vary depending on the menu mode (BASIC/EXPAND).
Muting
Initial setting is : MUTING OFF
Lets you mute the sound (same as MUTING button on the remote).
•ON mutes the sound from all speakers.
•OFF restores the sound to the original volume.
Front speaker bass adjustment
Level : FRONT BASS 0dB
Frequency : FRONT BASS 250Hz
Use the +/– knob to adjust the level, then turn the MENU knob to move select the frequency (Hz) and use the +/– knob to adjust the frequency. Repeat until you achieve the sound you desire.
• The level can be adjusted ±10 dB in 0.5 dB steps.
Front speaker treble adjustment
Level : FRONT TREBLE 0dB
Frequency : FRONT TREBLE 2.5kHz
Adjust as described in “Front speaker bass adjustment”.
• The level can be adjusted ±10 dB in 0.5 dB steps.
Centre speaker bass adjustment
Level : CENTER BASS 0dB
Frequency : CENTER BASS 250Hz
Adjust as described in “Front speaker bass adjustment”.
• The level can be adjusted ±10 dB in 0.5 dB steps.
Centre speaker treble adjustment
Level : CENTER TREBLE 0dB
Frequency : CENTER TREBLE 2.5kHz
Adjust as described in “Front speaker bass adjustment”.
• The level can be adjusted ±10 dB in 0.5 dB steps.
Rear speaker bass adjustment
Level : REAR BASS 0dB
Frequency : REAR BASS 250Hz
Adjust as described in “Front speaker bass adjustment”.
• The level can be adjusted ±10 dB in 0.5 dB steps.
Display dimmer control
Initial setting is : DISP. DIMMER 100%
Lets you adjust the brightness of the display window. It can be adjusted in 1% steps from 25 to 100%.
Distance unit •Expand mode only•
Initial setting is : DIST.UNIT [meter]
Lets you select either metres or feet as the unit of measure for setting distances. 1 foot corresponds to a 1 ms difference.
Equalizer memory •Expand mode only•
Initial setting is : EQ MEMORY [ON]
•ON allows you to set the equalizer independently for each surround mode.
•OFF allows you to use fix the equalizer to one setting for all surround modes.
Memory clear
Initial setting is : MEMORY CLEAR [NO]
To clear the memory, select [YES] and wait a few seconds. “Are you sure?” is displayed. If you select [YES] again and wait a few seconds, the unit clears all of the parameters and resets them to the factory presets “MEMORY CLEARED!” is displayed as confirmation.
(continued)