Sony SGPT11 Learning the remote control signal and registering it

Hint

This app can use as Small Apps.

You can configure the skin setting by tapping [Change skin] on the (Option menu). You can

configure the skin separately for each registered device.

If the category or manufacturer is not displayed, allow your tablet device to learn the remote

control signal then register it.

Two or more devices may be displayed depending on the category or manufacturer. If more

than one device is displayed, test the remote control operation with each of remote control

displayed and select the one that works correctly.

To register as a remote control for another device

Tap (Back), and then tap [ Register device] on the device list screen.

Learning the remote control signal and registering it

If the category or manufacturer of the device is not displayed at [Easy registration], register the

remote control as follows.

1. Start the Remote control app.

2. Tap [ Register device] or [Register device].

3. Tap [Learn from a remote control].

4. Select the category.

A remote control image is displayed on the screen.

5. Tap the button you want to assign the signal to.

6. When the menu screen is displayed, tap [Learn remote command].

7. Bring the remote control to be registered close to the IR data port of your tablet device, tap

[Start], and press the button to be learned on the remote control.

When the button is registered, the screen returns to the remote control display.

Hint

To learn more buttons, repeat steps 4 to 7.