Operating Your Camera
•Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button.
• Please press the SETUP button to save the changes and complete the setting.
Note
• There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
PRIVACY : Mask privacy area you do not wish to appear on the screen.
-OFF : Cancels the PRIVACY mode.
-ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or RIGHT button.
COM ADJ :
When wish to control CAMERA by external communication control device, it is function that set up CAMERA's communication states and protocol.
• CAM ID | : Assign ID number to the camera. It is restricted available to set |
| ID from 1~255 |
•DISP CAMID : Displays CAM ID on the top left of the screen.
•BAUD RATE : Configure baud rate from 9600bps, 19200bps, 38400bps, 57600bps.
•UART MODE: Configure parity bit to NONE,EVEN, or ODD. Data bit is set to 8bit and stop bit to 1bit.
•END
Note
• Please set CAM ID of CAMERA and external communication control device equally.
IMAGE ADJ : Includes image quality or special function factors.
• MIRROR : Sets a horizontal image inversionj.
MIRROR ON | MIRROR OFF |
COLOR IR CAMERA 32 User’s Manual | COLOR IR CAMERA 33 User’s Manual |
