Operating Your Camera
CAM TITLE : If you enter a title, the title will appear on the monitor.
1)If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’.
2) Set it to ‘ON’ by using the Function Setup switch. | CAMERA TITLE SETUP | |
A B C D E F G H I J K L M | ||
3) Press the Function Setup switch. | ||
N O P Q R S T U V W X Y Z | ||
4) Use the Function Setup switch to move to | a b c d e f g h i j k l m | |
a desired letter and select the letter by | n o p q r s t u v w x y z | |
pressing the Function Setup switch. | ||
← → C L R P O S E N D | ||
Repeat this to enter multiple letters. You | ||
| ||
can enter up to 15 letters. |
| |
5) Enter a title, move the cursor to ‘POS’ and |
| |
press the Function Setup switch. The | FRONT DOOR | |
entered title appears on the screen. Select | ||
| ||
the position to display the title on the |
| |
screen by using the Function Setup switch |
| |
and press the Function Setup switch. |
| |
When the position is determined, select |
| |
‘END’ and press the Function Setup switch |
| |
to return to the SPECIAL menu. |
|
Notes
•When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
•Only English is available in this mode.
•If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch.
SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize the output phase of multiple cameras using the power synchronization function
- INT : Internal Synchronization Type
-L/L : Power Synchronization Type,
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
Notes
•When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.
•When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
MOTION DET :
This product has a feature that allows you to observe movement of objects in 8 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected.
Activity can be monitor more efficiently.
1)When the SPECIAL menu screen is displayed, press the
Function Setup switch so that the arrow indicates‘MOTION DET’.
2)Set up the mode using the Function Setup switch.
-SENSITIVITY : You can select up to 8 MD areas.When SENSITIVITY number is high, motion detection sensitivity is increased to recognize even small movement.
-AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
-SEL POS : Determines which of the 4 vertices of each MD area is to be used.
-XPOS : Determines the coordinate of the horizontal axis for SEL POS.
-YPOS : Determines the coordinate of the vertical axis for SEL POS.
-FILL→SET : Fills in a selected MD area. The color of the area can be selected from brown, orange, blue, cyan, green, yellow, magenta and red.
-RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
COLOR CCD CAMERA 28 User Guide | COLOR CCD CAMERA 29 User Guide |
