Citizen Systems CLP-6002, CLP-6001 user manual Printer Setup Mode, Self-Test Mode

2.4 Printer Setup Mode

To enter the printer setup mode, press and hold down the Pause then press the Feed key and release both keys. The functions of the control keys are described below.

Changes to the printer configuration are stored in nonvolatile memory. This guarantees that the printer configuration is maintained even after the power is turned off.

[Functions]

Print mode selection, peeling sensor ON/OFF, auto-cutter ON/OFF, etc.

Pause key:	Selects the mode.
Feed key:	Selects the mode item.
TStop key:	Saves the selection contents and returns the printer to the
	normal operating mode.
Mode item	Indication

2.5 Self-Test Mode

The printer enters the self-test mode when the Feed key is pressed and held down while turning the printer on.

[Functions]

The printer performs the test print or enters the data dump mode (prints out the communication data by ASCII code). The printer returns to the normal operating mode when the power is turned off.

2-4