6-16
• Paper is fed to the tear position
• When manual tearing is needed,tear the label at this time.
• Performs next label printing.
When next print data is transmitted from the computer, the printer feeds back
paper to the previous printcompleted position and resumes printing.
6.5.3 Tear-off whenfeeding• If no print data is transmitted for 0.5 second after feeding, the tear-off will
start. If the Feed key is pressed again before starting tear-off, the printer
will feed paper without tear-off.
• Paperis fed to the tear position.
• When manual tearingis needed, tear the label at this time.
• Performsnext feeding or label printing.
If the Feed key is pressed or next print data is transmitted from the computer,
the printerfeeds back the paper to the previousprint completed position and
resumes feeding or printing.
Tear-off will start if nodat ais sent
for 0.5 second after printing
Paper is fed to the position where
manual tearing is possible
Paper is fed back to the previous
print completed position and printing
resumes
Peeling(m anual tearing)
Platen
Paperposi tion sensor
Print head