2-6
Voltagesetting mode
In the voltage setting mode, operate the paper gap and black line adjustment
controls so that the vol tages of both "PE" and "BL" displayed on the LCD scree n
read 3.0 V−3.3 V.
Setting procedure:
1 Sets only the liner(glassine paper) that has been peeled off the label paper.
2 Sets the paper gap level to 3.0V−3.3 V (paper gap comes first).
3 Sets the blackline level to 3.0 V−3.3 V (then black line).
Note: The order of steps 2 and 3 above may be reversed.