Manuals / Brands / TV and Video / VCR / Sony / TV and Video / VCR

Sony SLV-469 programs using the quick timer

1 56

Download 56 pages, 766.84 Kb

Additional Operations38

Recording TV

programs usingthe quick timer

After starting recording in the normal

way, you can have the VCR stop

recording automatically after a specified

duration.

QUICK TIMER

1While recording, press QUICK TIMER once.

The indicator appears in the

display window.

2Press QUICK TIMER repeatedly to set the duration.

Each press advances the time in increments of 30 minutes.

The duration decreases minute by minute to 0:00, then the VCR stops

recording and turns off automatically.

To extend the duration

Press QUICK TIMER repeatedly to set to the new duration.

To stop the VCR while recording

Press p STOP.

Using the quick timer during stop mode

You can set the quick timer and start recording during stop mode by

pressing QUICK TIMER. To set the channel, you can use the CH +/– or

INPUT SELECT buttons. Press QUICK TIMER repeatedly to set the

recording duration. The recording will start automatically.

VIDEO

0:00 0:30 1:00 10:30 11:00

123

456

789

Contents

Main Introduction WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Information For customers in the USA CAUTION NOTE: Table of contents Getting Started Additional Information Basic Operations Additional Operations Unpacking Inserting the batteries Using the remote commander Step 2 Setting up the remote commander Hookups Selecting the best hookup option Step 3 Audio/video (A/V) hookup Antenna hookup Pages 8 and 9 BUse this hookup if youre using a VHF-only antenna (you get channels 213 only) Hookup 1 Hookup 1: VCR setup 2 3 4 Hookup 4Hookup 4 Cable box with many scrambled channels Hookup 2 Hookup 2: VCR setup 2 5 Hookup 3 No cable box, or cable box with only a few scrambled channels Hookup 3: VCR setup 2 5 Hookup 4 Cable box with only a few scrambled channels, using an A/B switch Hookup 4: VCR setup 2 6 5 Step 4 2 Setting the clock 3 4 5 Selecting a language 2 Presetting channels 2 Presetting all receivable channels automatically 3 4 Getting Started Presetting/disabling channels manually 1 2 3 Getting Started Getting Started If the picture is not clear 1 2 channel you want to fine-tune, then press ENTER. Number buttons, ENTER MENU OK >/./?// 3 The fine tuning meter appears. 4 Note that the AFT setting switches to OFF. Playing a tape 1 2 Playing a tape (continued) 3 Turning on the VCR and TV, and starting playback automatically (Trinitron TV Synchro Play) programs 1 2 3 4 5 6 1 Recording TV programs (continued) 2 3 programs using the timer 1 Recording TV programs using the timer (continued) 2 3 4 5 Page Playing/searching at various speeds To resume normal playback Press PLAY. Searching for a selected point on the tape 1 2 To cancel searching Press PLAY or p STOP. To turn off the bar indication Press DISPLAY again. Searching for a selected point on the tape (continued) Skip-searching automatically programs using the quick timer 1 2 Using the quick timer during stop mode Checking/ changing/ canceling timer settings 1 2 3 4 Page Adjusting the picture Adjusting the tracking About Adaptive Picture Control (APC) Changing menu options 1 2 3 Editing with another VCR How to hook up to record on this VCR Operation (when recording on this VCR) Editing with another VCR (continued) 1 2 3 4 General setup information Setting the RF unit 1 2 3 4 1 2 3 Attaching a UHF/VHF band mixer 1 2 3 4 Troubleshooting Symptoms caused by contaminated video heads Troubleshooting (continued) Additional Information Specifications System Tuner section Inputs and outputs Timer section Index to parts and controls Front panel Display window Rear panel Remote commanderRemote commander Page E, F, G, H, I, J, K L, M, N, O P Q Index A, B C D S Q Hookup 3 Hookup 1 Hookup 2