Step 3: Hookups (continued)

Hookup 3

Antenna hookup

Pages 16 to 18

Make the following connections if you’re using an antenna (if you don’t have cable TV).

AUse this hookup if you’re using:

•VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)

•UHF-only antenna (you get channels 14 and higher)

•Separate VHF and UHF antennas

VCR

VHF/UHF

IN

OUT

Rear of TV

VHF/UHF

A

or

VHF

B

UHF

or

VHF

C

UHF

Match the type of connector on your TV: A, B, or C.

BUse this hookup if you’re using a VHF-only antenna (you get

channels 2–13 only)

Rear of TV

 

VCR

VHF/UHF

IN

OUT

VHF/UHF

A

or

VHF

B

UHF

or

VHF

C

UHF

Match the type of connector on your TV: A, B, or C.

For connector types B and C, no UHF connection is required.

If you cannot connect your antenna cable to the VCR directly

If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN connector. If you have separate cables for VHF and UHF antennas, you should use a U/V band mixer (not supplied). For details, see page 77.

16Getting Started