Hookup 1 : DVD-VCR setup

Plug the DVD-VCR into an AC outlet.

The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels when the DVD-VCR is plugged into the AC outlet.

AC power cord

to AC outlet

The DVD-VCR starts presetting the clock and channels.

When Auto preset is completed, the current time appears in the display window.

You have now completed DVD-VCR setup.

To change the on-screen display language to French or Spanish, see “Step 4 : Selecting a language” on page 21.

The clock is set using a time signal provided by some TV channels. If the clock is incorrect, or “--:--” appears in the display window, see “Using Manual Clock Set” on page 24.

To add or disable channels manually, see “Presetting/disabling channels manually” on page 28.

Started Getting

Notes

•If you connect the AC power cord before the antenna connections are completed, the channels may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 26.

•Do not press any buttons on the DVD-VCR or remote commander during Auto preset.

•Auto preset starts automatically only when you plug in the AC power cord for the first time after you purchase the DVD-VCR.

•Auto preset can be performed by pressing x STOP continuously for 5 seconds or more with the DVD-VCR power turned off.

continued

Basic hookups 17