4

Press V/v to select the setup item from the displayed list:

“Dolby Digital,” “DTS,” or “Audio DRC.”

ENTER

5

Press B/b to select an item, then press O RETURN to confirm the setting.

 

 

ENTER

RETURN

6

Press O RETURN repeatedly to exit the menu.

 

 

RETURN

 

 

Menu choices

• Dolby Digital (DVD only)

Selects the type of Dolby Digital signal. The default setting is indicated in bold print.

D-PCM

Select this when the player is connected to an audio component

 

lacking a built-in Dolby Digital decoder.

 

 

Dolby Digital

Select this when the player is connected to an audio component

 

with a built-in Dolby Digital decoder.

 

 

• DTS (DVD only)

Selects whether or not to output DTS signals. The default setting is indicated in bold print.

Off

Select this when the player is connected to an audio component

 

lacking a built-in DTS decoder.

 

 

On

Select this when the player is connected to an audio component

 

with a built-in DTS decoder.

 

 

• Audio DRC (Dynamic Range Control) (DVD only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–LINE OUT AUDIO L/R jacks

–DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby

Digital” is set to “D-PCM”.

The default setting is indicated in bold print.

Standard

Normally select this position.

 

 

TV Mode

Makes the low sounds clear even if you turn the volume down.

 

 

50Audio Setup