To cancel the setting
Select “Off” in step 2.
Notes
•When the playing signal does not contain a signal for the rear speakers, the surround effects will be difficult to hear.
•When you activate the surround effect, turn off the surround setting of the connected TV or amplifier (receiver).
•Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings.
•If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set “Dolby Digital” to “Dolby Digital” or “DTS” to “On” in “AUDIO SETUP” menu (page 53), sound will come from your speakers but it will not have the surround effect.
•You cannot perform playback quickly or slowly with sound when a virtual surround effect is set (page 31).
76Virtual surround setting