Recording from a connected equipment using the timer

You can set the DVD-VCR to automatically record programs from a connected cable box or satellite receiver. To connect a cable box or satellite receiver, see “Connecting a cable box or satellite receiver” (page 16).

You can preset up to eight programs at a time.

Before you start…

•Check that the DVD-VCR clock is set to the correct time.

•Turn on the DVD-VCR, TV and your cable box or sattelite reciever.

•Set the TV to video input so that the signal from the player appears on the TV screen.

•Set TV / DVD·VIDEO switch to DVD·VIDEO on the remote.

•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.

•If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback.

Z

TV / DVD·VIDEO switch

SELECT VIDEO

CLEAR

TV/VIDEO

TIMER INPUT SELECT

x STOP H PLAY

V/v/B/b

ENTER

O RETURN

1

2

Press SELECT VIDEO to control the VCR.

Press TIMER.

The timer programming menu appears.

38US Recording from a connected equipment using the timer