Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number.

1 Set TV / DVD·VIDEO at the top of the remote commander to TV.

2 Hold down ?/1, and enter your TV’s code number using the number buttons. Then release ?/1.

Now you can use the ?/1, VOL +/–, PROG +/–, MUTING∗ , TV/VIDEO, 0-9 and -/--∗buttons to control your TV. You can also use the buttons marked with a dot (•) to control a Sony TV. To control the DVD-VCR, reset TV / DVD·VIDEO to DVD·VIDEO.

∗for Sony TV only

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer

Code number

 

 

Sony

01, 02

 

 

Akai

68

 

 

Ferguson

52

 

 

Grundig

10, 11

 

 

Hitachi

24

 

 

JVC

33

 

 

Loewe

45

 

 

Mivar

09, 70

 

 

NEC

66

 

 

Nokia

15, 16, 69

 

 

Notes

Manufacturer

Code number

 

 

Panasonic

17, 49

 

 

Philips

06, 07, 08

 

 

Saba

12, 13

 

 

Samsung

22, 23

 

 

Sanyo

25

 

 

Sharp

29

 

 

Telefunken

36

 

 

Thomson

43

 

 

Toshiba

38

 

 

•If you enter a new code number, the code number previously entered will be erased.

•If the TV uses a different remote control system from the one programmed to work with the DVD-VCR, you cannot control your TV with the remote commander.

•When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries.

10Setting up the remote commander