5 – PROGRAM + Press PROGRAM +/– (repeatedly) to select the correct TV system. If you watch the system B/G, select “G.” If you watch the system D/K, select “K.”

6

Tune the TV to the same channel as that

 

shown in the display window so that

the picture on the right appears on the TV screen.

Refer to your TV manual for tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.

SONY VIDEO CASSETTE RECORDER

Getting Started

7

 

Press RF CHANNEL.

 

RF CHANNEL

You have now tuned your TV to the VCR. Whenever you want to

 

 

play a tape, set the TV to the video channel.

 

 

To check to see if the TV tuning is correct

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the picture does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL in step 2, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.

Note

• If you set the wrong TV system, you may have no sound or sound may be distorted.

Getting Started

11

Page 11
Image 11
Sony SLV-E780EE You have now tuned your TV to the VCR. Whenever you want to, Play a tape, set the TV to the video channel