Editing with another VCR, This VCR Recorder

Editing with another VCR

How to connect to record on this VCR

This VCR (Recorder)				TV

LINE-2 IN

Other VCR (Player)

LINE OUT

VMC-810 audio/video cable (not supplied)

: Signal flow

Notes

•Make sure you connect the plugs to jacks of the same colour.

•If the other VCR is a monaural type, leave the red plugs unconnected.

•If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise.

continued

Additional Operations

Page 41

Image 41

Sony SLV-E780EE manual Editing with another VCR, How to connect to record on this VCR, This VCR Recorder, Other VCR Player

Contents

Video Cassette Recorder Safety PrecautionsInstalling Compatible colour systems Table of contents Getting Started Unpacking Using the remote commander Setting up the remote commanderInserting the batteries You can use this remote TV control buttons Setting up the remote commander Audio Monitor Connecting the VCR To a TV that has Line in connector To a TV that has a EURO-AV Scart connectorAdditional connections Cable as shown on the right Factory-preset RF channel appears in the display window Tuning your TV to the VCRPress ON/STANDBY to turn on the VCR Press RF Channel on the VCR You have now tuned your TV to the VCR. Whenever you want to To check to see if the TV tuning is correctPlay a tape, set the TV to the video channel To obtain a clear picture from the VCR To cancel the Auto Set Up function Setting up the VCR with the Auto Set Up functionPress Auto SET UP Tip Before you start… Setting the clock Press /to flash the month and set the month pressing Setting the clockPress /to start the clock Press OK Press /.to select Language and press OK Manual setup Selecting a languageYou can change the on-screen display language Prog + Manual setup Presetting channelsPress /.to select Tuner and press OK Press Prog +/- to select the programme Press /.to move the cursor Ó toPosition Press ?//repeatedly until the channel you want is displayed Disabling unwanted programme positions Manual setup -- Presetting channels Press ?//to get a clearer picture, then press OK If the picture is not clear Play P Pause # FF p Stop 03 REW Playing a tapeBasic Operations To replay a recently watched scene Additional tasksTo set the colour system To play an NTSC-recorded tape To display the counter on the TV screen, press Display Playing a tapeTo use the time counter Recording TV programmes Insert a tape with its safety tab in placeTurn on your TV and set it to the video channel To record from a decoder, turn it on To stop recording Recording TV programmes To check the remaining time Safety tabTo watch another TV programme while recording To save a recording Tips Press Menu and select TIMER, then press OK Recording TV programmes using the timerYou can preset up to eight programmes at a time To stop the VCR while recording, press p Stop on the VCR Recording TV programmes using the timer To record satellite broadcasts To use the VCR after setting the timerDaily/weekly recording Tips Additional Operations Playing/searching at various speedsPlay Playback options Operation To resume normal playback Playing/searching at various speeds Using the quick timer during stop mode Recording TV programmes using the quick timerPress Quick Timer repeatedly to set to the new duration To extend the duration Checking Changing/ cancelling timer settings When the timer settings overlap Selecting the sound during playback Selecting stereo and bilingual programmesHow sound is recorded on a video tape Press Audio Monitor to select the sound you want About Optimum Picture Control OPC Adjusting the pictureAdjusting the tracking Adjusting the picture Initial settings are indicated in bold print Press MENU, then select Settings Select OptionsChanging menu options Menu choices Video Options menu choices Menu option Set this option to Changing menu optionsOptions menu choices Menu option Set this option to VMC-810 audio/video cable not supplied Signal flow How to connect to record on this VCREditing with another VCR This VCR Recorder Other VCR Player EURO-AV Scart Signal flow Not suppliedEditing with another VCR Before you start editing Operation When recording on this VCRTo stop editing Press the p Stop buttons on both VCRs Symptoms caused by contaminated video heads TroubleshootingSymptom Remedy Additional Information Recording Timer recording Symptom Remedy Others Symptom Remedy Troubleshooting Supplied accessories SpecificationsSystem Inputs and outputs Refer to the pages indicated in parentheses for details Index to parts and controlsFront panel Video Display window Index to parts and controls Rear panel Remote commander J, K Index

Sony SLV-E780EE Editing with another VCR, How to connect to record on this VCR, This VCR Recorder

Models: SLV-E780EE