Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons.
1 In step 5 on page 14, press ?//repeatedly to display the number “0” beside CHANNEL SET.
2 Press OK.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function.
1 Press PROG +/– to select the programme number for which you cannot obtain a clear picture.
2 Press MENU, then select TUNER PRESET and press OK.
3 Select FINE TUNING. The fine tuning meter appears.
TUNER PRESET |
| PROG14 | Selected programme position | ||
SYSTEM |
| • B / G D / K I |
| ||
NORMAL / CATV • NORM | CATV |
| |||
AUTO PRESET |
|
| |||
CHANNEL SET | 35 |
|
|
| |
AFT |
| • ON | OFF |
| |
FINE TUNING | – – – – |
| – – – – |
| |
|
| ||||
|
| ||||
SET | : [ | ] |
|
|
|
4 Press ?//to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
•The menu disappears automatically if you do not proceed for more than a few minutes.
Started Getting
Getting Started 15