Step 2

Setting up the remote commander

Inserting the batteries

Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive

(+) end clicks into position.

Started Getting

Using the remote commander

You can use this remote

Remote sensor

commander to operate this

 

VCR and a Sony TV. Buttons on

 

the remote commander marked

 

with a dot (•) can be used to

 

operate your Sony TV. If the TV

 

does not have the gsymbol

 

near the remote sensor, this

 

remote commander will not

 

operate the TV.

 

TV /

VIDEO

To operate

Set

TV / VIDEO to

the VCR

VIDEO and point at the remote sensor on the VCR

a Sony TV

TV

and point at the remote sensor on the TV

Notes

•The TV/VIDEO button selects an input source of the TV from either aerial in or line in. The button does not control this VCR.

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

Getting Started 5