Additional Information

Troubleshooting

If you have any questions or problems not covered below, please consult your nearest Sony service facility.

Clock Power

Playback

Symptom

Remedy

The ON/STANDBY switch

• Connect the mains lead to mains securely.

does not function.

 

 

 

The power is turned on but the

• Moisture condensation occurs. Turn the power off,

VCR does not operate.

unplug the mains lead and leave the VCR to dry for

 

over one hour.

The clock has stopped and

• The clock stops if the VCR is disconnected from the

“–:– –” lights in the display

mains for more than eight hours (SLV-ED10MPS/PS

window.

only) or 24 hours (SLV-ED10ME/MJ/SG only). Reset

 

the clock (and timer).

The playback picture does not

• Make sure the TV is set to the video channel. If you are

appear on the TV screen.

using a monitor, set it to video input.

The playback picture has no

• Set the PAL/MESECAM option in the SET UP MENU

colour or unusual colours.

according to your local colour system.

The picture is not clear.

• Adjust the tracking with the TRACKING +/– buttons.

 

• Make sure the colour system is set to the system that

 

the tape was recorded in.

 

• The video heads are dirty (see page 42). Clean the

 

video heads using the Sony T-25CLD, T-25CLW or E-

 

25CLDR video head cleaning cassette. If these cleaning

 

cassettes are not available in your area, have the heads

 

cleaned at your nearest Sony service facility (a

 

standard service charge will be required). Do not use a

 

commercially available liquid type cleaning cassette

 

other than Sony’s, as they may damage the video

 

heads.

 

• The video heads may have to be replaced. Consult

 

your local Sony service facility for more information.

 

 

The picture rolls vertically

• Adjust the vertical hold control on the TV or monitor.

during picture search.

 

The picture has no sound.

• The tape is defective.

 

• If you made A/V connections, check the audio cable

 

connection.

40Additional Information