Using Playback Dial on the VCR

With Playback Dial, you can operate the following playback options.

Playback Dial

To

Do this

Resume play after pause

Press H PLAY

 

 

Fast-forward the tape

Quickly turn and release Playback Dial to the right

 

(M FF) during stop

 

 

Rewind the tape

Quickly turn and release Playback Dial to the left

 

(m REW) during stop

 

 

To use the time counter

Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “ 0:00:00.” Search for the point afterwards by referring to the counter.

Hour Minute Second

To display the counter on the TV screen, press DISPLAY.

Notes

•When you play back a tape recorded in the PAL or MESECAM colour system, streaks may appear even if the colour system setting is set to AUTO. If so, set COLOUR SYSTEM to PAL or MESECAM in the USER SET menu (see page 56).

•Do not turn Playback Dial forcibly. It may damage Playback Dial.

•The counter resets to “ 0:00:00” whenever a tape is reinserted.

•The counter stops counting when it comes to a portion with no recording.

•If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two colour systems.

•Depending on your TV, the following may occur while playing an NTSC-recorded tape:

–The picture becomes black and white. –The picture shakes.

–No picture appears on the TV screen.

–Black streaks appear horizontally on the TV screen. –The colour density increases or decreases.

•Tapes recorded in the LP mode of other NTSC system VCRs can be played back on this VCR, but the picture quality cannot be guaranteed.

•While setting the menu on the TV screen, buttons for playback on the remote commander do not function.

Operations Basic

Basic Operations 31