| Symptom | Remedy |
| The timer does not operate. | • Check that the clock is set. |
|
| • Make sure a tape has been inserted. |
recording |
| • Check that the safety tab has not been removed. |
| • Make sure the tape is not at its end. | |
|
| |
|
| • Make sure a programme has been set for timer |
|
| recording. |
Timer |
| • Make sure your timer settings are past the current |
| time. | |
|
| |
|
| • The clock stops if the VCR is disconnected from the |
|
| mains. Reset the clock and timer. |
|
| • Turn the power off and unplug the mains lead. |
|
|
|
| A tape cannot be inserted. | • Check that a tape is not already in the tape |
|
| compartment. |
|
|
|
| The remote commander does | • Make sure you are pointing the remote commander at |
| not function. | the remote sensor on the VCR. |
|
| • Replace all the batteries in the remote commander |
|
| with new ones if they are weak. |
|
| • Make sure the •TV/VIDEO remote control switch is |
|
| set correctly. |
Others |
|
|
The selected input line | • Press INPUT SELECT to display the connected line. | |
connector number does not |
| |
appear in the display window. |
| |
| The tracking meter does not | • The recording condition of the tape is very poor and |
| appear on the TV screen. | tracking cannot be adjusted. |
|
|
|
| The display window becomes | • The display window automatically becomes dim |
| dim. | when the VCR is in standby mode. |
|
|
|
| The VCR needs to be cleaned. | • Clean the cabinet, panel and controls with a dry, soft |
|
| cloth, or a soft cloth slightly moistened with a mild |
|
| detergent solution. Do not use any type of solvent, |
|
| such as alcohol or benzine. |
|
|
|
Information Additional
continued
Additional Information 63