To use the time counter
At the point on the tape that you want to find later, press COUNTER RESET. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter.
SP
APC
To display the counter on the TV screen, press DISPLAY.
Notes
•The counter resets to “0:00:00” whenever a tape is reinserted.
•The counter stops counting when it comes to a portion with no recording.
•If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This is due to the difference between the counting cycles of the two colour systems.
•Depending on your TV, the following may occur while playing an
–the picture is black and white
–the picture shakes
–no picture appears on the TV screen
–black streaks appear horizontally on the TV screen
–the colour density increases or decreases.
•Tapes recorded in the LP mode of NTSC system on other VCRs can be played back on this VCR, but the picture quality cannot be guaranteed.
•While setting the menu on the TV screen, you cannot use the ·PLAY, P PAUSE, )#FF, 0 3REW or pSTOP button. These buttons are used for menu operations.
continued
Basic Operations
Operations Basic
21