Troubleshooting (continued)

Sapphire tape cleaner

The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded. This cleaner can prevent the video heads from contamination by removing dust or mold from a tape with the sapphire edge.

Specifications

System

Colour system

PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system

B/G, D/K, I Channel coverage

B/G: VHF E2 to E12/UHF E21 to E69/ CATV S01 to S05, S1 to S41

D/K: VHF R1 to R12/UHF R21 to R69

I:VHF SA4 to SA13/UHF B21 to B69/ CATV S01 to S05, S1 to S41

RF output signal

UHF channels 21 to 69 (B/G, D/K, I) Aerial out

75-ohm asymmetrical aerial socket

Inputs and outputs

LINE-1 IN, LINE-2 IN and LINE-3 IN (SAT IN) VIDEO IN, phono jack (1 each)

Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO IN, phono jack (2 each) Input level: 327 mVrms

Input impedance: more than 47 kilohms LINE-1 OUT

VIDEO OUT, phono jack (1)

Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO OUT, phono jack (2) Standard output: 327 mVrms Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

LINE-2 OUT (AUDIO)

AUDIO OUT, phono jack (2) Standard output: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

General

Power requirements

110 – 240 V AC, 50/60 Hz

Power consumption 18 W

Operating temperature 5°C to 40°C

Storage temperature –20°C to 60°C

Dimensions

Approx. 430 × 100 × 295 mm (w/h/d) including projecting parts and controls

Mass

Approx. 4.5 kg

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2) Aerial cable (1)

Plug adaptor (1) (SLV-ED60ME/MJ only)

Design and specifications are subject to change without notice.

44Additional Information