5 | Tune the TV to the same channel as that |
| shown in the display window so that |
| the picture on the right appears on the |
| TV screen. |
Refer to your TV manual for tuning instructions.
If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.
SONY VIDEO CASSETTE RECORDER
Started Getting
6 | Press RF CHANNEL. |
| You have now tuned your TV to the VCR. From now on, whenever |
you want to play a tape, set the TV to the video channel.
RF CHANNEL
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 5 above, go to step 6 to finish this procedure once. Then start from step 2. After pressing RF CHANNEL in step 2 to display the RF channel, press PROGRAM +/– so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.
If you cannot obtain a clear picture after performing this procedure, we recommend you connect the VCR and TV using an audio/video cable (see “To a TV that has audio/video input jacks” on page 6). If the same symptom persists, consult your nearest Sony dealer.
Note
•If you set the wrong TV system, you may have no sound or sound may be distorted (noisy sound).
Getting Started 9