Additional Information
General setup information
Setting the RF unit
When connecting the VCR to the TV using only the antenna cable, you must set the RF UNIT switch on the rear of the VCR so that the TV can receive the correct signal from the VCR.
TV
RF UNIT
CH3 CH4
?/1 POWER | CHANNEL +/– |
TV/VIDEO
1 2 3
4 5 6
7 8 9
0
1
2 Press ?/1POWER to turn on the VCR.
3 Press TV/VIDEO to turn on the VIDEO indicator in the VCR’s display window.
4 Press CHANNEL +/– to display a channel number in the display window. Select an active channel number in your area.
5 Turn on your TV and set it to the channel you selected in step 1 (channel 3 or 4).
The channel you selected in step 4 appears on the TV screen. If the channels change when you press CHANNEL
Whenever you use the VCR, set the TV to the channel selected in step 1.
Information Additional
continued
General setup information 101