IBM M71V2 Many users find it better to set the Sleep Timer, to zero to prevent closed connections

When the M71V2 goes into Sleep Mode, it turns off the internal radio card. On some host systems, this causes the current telnet session to be closed.

Many users find it better to set the Sleep Timer

to zero to prevent closed connections.

Note: The power key wake-up feature is only available on units with Decoder version 2.0 or later. The Decoder can only be re- programmed at the factory.

The “Backlight on Boot” function sets if the backlight will be lit when the unit is first powered on.

The “Backlight Timer” determines how many minutes the M71V2’s backlight will stay on after “power on” or when the backlight key is pressed.

The PowerOff After Sleep timer is how many minutes the M71V2 will wait, after the Sleep Timer has activated, before shutting off the M71V2 completely.

The “Wakeup on All Keys” function allows the user to have the unit “wake-up” when any key on the keyboard is pressed. This is not recommended if the user is putting the unit into the optional M71V2 holster.

If you do not save your settings they will be lost when you exit the Power Management screen.

The Power Management options will only be made permanent if you do a Save, otherwise they are lost when the unit is turned off and on.

57