IBM M71V2 manual Setting the Code 39 Bar Code, CODE 39 DECODER, Full Ascii, MOD 43 CHECK DIGIT

Setting the Code 39 Bar Code

The individual bar codes can be enabled and disabled by hitting the [Space] key. Only enabled bar code symbologies can be modified. To modify a bar code symbology hit the [ENTER] key while the bar code name is highlighted.

CODE 39 DECODER

ON*	Enable reading Code 39 bar codes.
OFF	Disable reading Code 39 bar codes.
FULL ASCII
ON	Enable the Full ASCII Extension to Code 39. This allows the scanner to
	read upper and lower case characters as well as extended special
	characters.
OFF*	Disable the Full ASCII Extension to Code 39. This sets the reader to the
	standard Code 39 mode.

MOD 43 CHECK DIGIT

ON Enable the Mod 43 Check Digit for Code 39. When this option is enabled, only Code 39 labels that contain a valid check digit will be read.

OFF* Disable the Mod 43 Check Digit. Check digit verification will not be performed.

SEND CHECK DIGIT

ON	Transmit the Mod 43 Check Digit with the bar code data. Requires the
	“Mod 43 Check Digit” option above to be set on.
OFF*	Do not transmit the Mod 43 Check Digit.

CONCATENATE MODE

68