The ShowView system is the feature that simplifies programming the VCR to make timer recordings. Just enter the ShowView number listed in the TV programme guide. The date, times, and programme position of that programme are set automatically. You can preset a total of six programmes, including settings made with other timer methods.
Before you start…
•Check that the VCR clock is set to the correct time and date.
•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.
•To record from a decoder, turn it on.
•Turn on your TV and set it to video input.
•Set OPTIONS PROG. to SHOWVIEW or MIXTE in the RÉ GLAGES UTILISATEUR menu (see page 47).
•Refer to “Index to parts and controls” for button locations.
1 MINUTERIE
LECTURE
OK
Press 
MINUTERIE.
•When you set OPTIONS PROG. to MIXTE:
The OPTIONS PROG. menu appears on the TV screen. Press M/m to select SHOWVIEW, then press OK.
OPTIONS PROG.
NORMALE
SHOWVIEW
SÉ LECT. | : |
|
RÉ GLER | : OK | SORTIE : MENU |
•When you set OPTIONS PROG. to SHOWVIEW:
The SHOWVIEW menu appears on the TV screen.
SHOWVIEW
CODE – – – – – – – – –
CODE : 0 – 9
RÉ GLER : OK SORTIE : MENU
34Recording TV programmes using the ShowView system