To watch another TV programme while recording

1 Press ÉTV/VIDEO to turn off the VIDEO indicator in the display window.

2 Select another programme position on the TV.

To save a recording

To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape.

Safety tab

Tips

You can select a video source from the LINE-1 IN VIDEO/AUDIO jacks also using the INPUT SELECT button.

The display appears on the TV screen indicating information about the tape, but the information won’t be recorded on the tape.

If you don’t want to watch TV while recording, you can turn off the TV.

Notes

The display does not appear during still (pause) mode or slow-motion playback.

The display will not appear while playing an NTSC-recorded tape.

If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two video systems.

When you insert a non-standard commercially available tape, the remaining time may not be correct.

The remaining time is intended for rough measurement only.

About 30 seconds after the tape begins playback, the tape remaining time will be displayed.

Operations Basic

Basic Operations 29