Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video channel.
•Press INPUT SELECT to display “L1” in the display window.
•Press SP/LP to select the tape speed, SP or LP
PPAUSE
rREC
1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press PPAUSE.
3
4 To start editing, press the PPAUSE buttons on both VCRs at the same time.
To stop editing
Press the pSTOP buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press PPAUSE on this VCR when an unwanted scene begins. When it ends, press PPAUSE again to resume recording.
Note
•If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press rREC again during recording pause in step 3 so the VCR analyses the tape. Then, when you start editing in step 4, press PPAUSE after the OPC indicator stops flashing. If you press PPAUSE before the OPC indicator stops flashing, the OPC function is cancelled.
Additional Operations 45