Sony manual 10

If your TV has a Scart (EURO-AV) connector

	AERIAL IN
i LINE-1	AERIAL OUT

Mains lead	(TV)
to mains	AERIAL IN
	Aerial cable (supplied)
	Scart
: Signal flow	(EURO-AV)
	Scart cable (not supplied)

1

2

3

4

Disconnect the aerial cable from your	ARIAL
TV and connect it to AERIAL IN on	ANTNN
	IN
the rear panel of the VCR.	NTR
	OUT
	SORTI

Connect AERIAL OUT of the VCR	ARIAL
and the aerial input of your TV using	ANTNN
	IN
the supplied aerial cable.	NTR
	OUT
	SORTI

Connect LINE-1 (TV) on the VCR and the Scart (EURO-AV) connector on the TV with the optional Scart cable.

This connection improves picture and sound quality. Whenever you want to watch the VCR picture, press t TV/ VIDEO to display the VIDEO indicator in the display window.

Connect the mains lead to the mains.

Note

•If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is recommended. In the OFF position, only the signal from the aerial is output through the AERIAL OUT connector (see page 16).

10Connecting the VCR